Материнская (системная) плата SuperMicro X8DTN+-F Retail

Характеристики

• Product SKUs:
• MBD-X8DTN+-O: X8DTN+ (Standard Retail Pack)
• MBD-X8DTN+-B: X8DTN+ (Bulk Pack)
• Physical Stats:
• Form Factor: Enhanced Extended ATX
• Dimensions: 13.68" x 13" (34.7cm x 33cm)
• Processor/Cache:
• CPU: Dual 1366-pin LGA SocketsSupports up to two Intel® 64-bit Xeon® processor(s) of the same type below:• Intel®• Xeon®Processor 5600 Series (Westmere)• Intel®• Xeon®Processor 5500 Series (Nehalem-EP)
• QPI: up to 6.4 GT/s
• System Memory:
• Memory Capacity: 18x 240-pin DIMM socketsSupports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memorySupports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memoryMemory Mirroring supported
• Memory Type: 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
• DIMM Sizes: 1GB, 2GB, 4GB , 8GB , 16GB
• Memory Voltage: 1.5 V / 1.35V
• Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)Supports Intel® x4 and x8 Single Device Data Correction (SDDC)Note: This board does not support LRDIMM memory. Please refer to HERE for list of motherboards with LRDIMM support.
• On-Board Devices:
• Chipset: Intel® 5520 (Tylersburg) chipsetICH10R + IOH-36D
• SATA: Intel ICH10R SATA 3.0Gbps ControllerRAID 0, 1, 5, 10 support (Windows)RAID 0, 1, 10 support (Linux)
• IPMI: Supports for Intelligent Platform Management Interface v.2.0200-pin IPMI slot (SIMLP)(Optional: AOC-SIMLP-B(+))(Optional: AOC-SIMLP-3(+)) with 3rd LAN supportNOTE: Supports chassis 2U and up
• Network Controllers: Intel® 82576 Dual-Port Gigabit Ethernet ControllerSupports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 outputIntel® I/OAT 3 support for fast, scaleable, and reliable networkingVMDq support for better performance of virtualization
• Graphics: ATI ES1000 controller with 32 MB of video memory
• Super I/O: Winbond 83627HF chip
• Input / Output:
• Serial ATA: 6 Serial ATA ports6 SATA hard drives supported
• IDE: Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) CardSupports UDMA Mode 5, PIO Mode 4, and ATA/100
• Floppy: 1 Floppy controller; 1.44 MB
• LAN: 2 RJ45 LAN ports
• USB: 2 USB rear ports2 USB on-board2 USB internal headers(3 ports)7 total USB ports, 2.0 Compliant
• VGA: 1 VGA Port
• Keyboard / Mouse: PS/2 keyboard and mouse ports
• Serial Port / Header: 1 Fast UART 16550 serial port1 Fast UART 16550 serial header (opt)
• Chassis ( Optimized for X8DTN+ ):
• 2U Chassis: CSE-213A-R900LPBCSE-216A-R900LPBCSE-216E16-R920LPBCSE-216E26-R920LPBCSE-825TQ-563LPBCSE-825TQ-R700LPBCSE-825TQ-R720LPBCSE-826A-R1200LPBCSE-826TQ-R800LPB
• 3U Chassis: CSE-835TQ-R800BCSE-835TQ-R920BCSE-836A-R1200BCSE-836E1-R800BCSE-836E2-R800BCSE-836TQ-R800BCSE-936A-R1200BCSE-936A-R900BCSE-936E1-R900
• Tower / 4U Rackmount: CSE-745TQ-800BCSE-745TQ-920BCSE-745TQ-R800BCSE-846A-R1200BCSE-846E1-R900BCSE-846E2-R900CSE-846TQ-R900BCSE-847A-R1400LPBCSE-847E1-R1400LPBCSE-847E16-R1400LPBCSE-847E2-R1400LPBCSE-847E26-R1400LPB
• Important Chassis Notes: To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
• Expansion Slots:
• PCI-Express: 2 (x8) PCI-E slots (1 in x16 slot)1 (x4) PCI-E slot (in x8 slot)
• PCI-X: 1x 64-bit 133MHz PCI-X (3.3V) slots2x 64-bit 133/100MHz PCI-X (3.3V) slots
• UIO: 1 UIO slot (PCI-E 2.0 x8 slot)
• System BIOS:
• BIOS Type: 32Mb SPI Flash EEPROM with AMI® BIOS
• BIOS Features: Plug and Play (PnP)PCI 2.2ACPI up to 3.0USB Keyboard support
• Management:
• Software: Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5SuperDoctor® III
• Power Configurations: ACPI / ACPM Power Management
• PC Health Monitoring:
• Voltage: Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages.5-Phase-switching voltage regulator
• FAN: Total of eight fan headers supporting up to 8 fansEight 4-pin fan headers8x fans with tachometer status monitoringSupport 3-pin fans (w/o speed control)Low noise fan speed control (4-pin fan only)
• Temperature: Monitoring for CPU and chassis environmentThermal Control for 8x fan connectorsPECI
• Other Features: Chassis intrusion detectionChassis intrusion header
• Operating Environment / Compliance:
• RoHS: RoHS Compliant 6/6, Pb Free
• Environmental Spec.: Operating Temperature: 10° to 35° C (50° to 95°F)Non-operating Temperature: -40° to 70° C (-40° to 158° F)Operating Relative Humidity: 8% to 90% (non-condensing)Non-operating Relative Humidity: 5 to 95% (non-condensing)